This device is easy and fast to connect, with simple and easy-to-understand functions, mainly used for call intercom with the nurse station, display and viewing of patient basic information, and is typically installed on the bedside equipment belt.
Function introduction:
Transmit data information based on TCP/IP network protocol.
The call intercom between the bedside extension and the main unit in the nurse station can also be used for duplex intercom with the ward entrance machine.  It supports handheld handle call intercom and call release, with clear and undistorted voice.
Press the "reinforcement" button on the extension to call for additional medical personnel.
Support synchronous data, real-time update of patient information data in the bed.
Using a multi-touch capacitive display, it displays the bed number, patient's basic information, and patient's electronic care identification card information, distinguishing the care level as special, first, second, and third according to different colors.
Support admission instructions, hospital introduction, department introduction, educational videos, fee inquiries, test inquiries, examination inquiries, doctor's advice inquiries, active screen-off, message notifications and other functions.
Supports 24V power box centralized power supply or 24V non-standard POE power supply (recommended)
Technology, specifications and parameters:
Screen size: 7 inches
Resolution: 1024*600
Operating system: Android 10
Main control platform: quad-core Cortex™ -A53  1.8GHz main frequency
Memory capacity: 1GB
Fuselage storage: 8GB
Video: H.264 codec
Audio: G.711/G.722/G.729 codec
Network: 10-100Mbps adaptive
Communication protocol: TCP, UDP, RTP, ARP, IGMP, HTTP, SIP
External interfaces: power interface *1, alarm input *2, RJ45 *1, RS485 interface *1
Touch control method: multi-point capacitive touch screen
Operating voltage: DC12-24V
Standby power consumption: less than 5W
Power consumption: less than 10W
Operating temperature: -10℃~+55℃
External dimensions: 230*127.5*29.6mm (L*W*H)
Installation size: 163.8*79.3*18.3mm (L*W*H)
Installation method: Embedded