Ward nursing intercom LED corridor screen HIN-CS1
Update：2024/1/15 20:13:29
- Brand Ward nursing intercom system
- Model HIN-CS1
Introduction
This device is easy and fast to connect, with simple and easy-to-use functions, mainly used to display the current time and call information prompts, and is usually hoisted in the corridor.
Function introduction:
The call information can be displayed by bed call, bathroom call, and nursing reinforcement status, and the call information flashes to indicate that the call is in progress.
When the bathroom calls, it can display "XXXX room bathroom alarm".
During nursing, the message "bed XXX requests nursing" can be displayed.
When reinforcement is needed, the message "Bed XXX requests reinforcement" can be displayed.
Display the date and time when there is no call.
The corridor screen prompt can be customized, limited to 20 words;
Technology, specifications and parameters:
Brightness of naked screen: ≥900cd/ ㎡
Pixel pitch: 4.75mm
Resolution: 128 wide, 32 high
Appearance color: black
LED color: red, green, yellow
Voice broadcast: (optional)
Communication mode: support RS485, support TCP/IP communication
Screen power: ≤80W
Operating voltage: AC220V/50HZ input, DC5V output
Weight: 6KG
Dimensions: 852*186*50mm
Operating temperature: -30℃～70℃
Installation method: hoisting
Wiring instructions:
The input terminal is connected to 220V AC power, and the wiring definition is: live wire (red), neutral wire (blue), ground wire (yellow-green);
The communication is transmitted through a network cable with 568B connection method and 8-core network cable.
More Products
