This device is easy and fast to connect, with simple and easy-to-understand functions, mainly used to display basic patient information in the ward, as well as a simple workstation for nurses, such as answering calls, nursing positioning, etc. It is usually installed on the wall outside the ward door or outside the door.
Function introduction:
Transmit data information based on TCP/IP network protocol.
The ward door machine can perform duplex intercom with the nurse station host or medical deputy machine, with clear voice and no distortion.
Support synchronous data, real-time update of patient information data in the bed.
Using a multi-touch capacitive display, it supports the preview of information about the current patient in the ward bed, the responsible doctor, and the responsible nurse, as well as the introduction of departmental data.  It displays the current room number and bed number, and the bed number is distinguished by different colors according to the nursing level, including special level, first level, second level, and third level.
You can view the information introduction of the department and the educational videos and texts released by the hospital.
Supports 24V power box centralized power supply or 24V non-standard POE power supply (recommended)
Technology, specifications and parameters:
Screen size: 15.6 inches
Resolution: 1920*1080
Operating system: Android 10
Main control platform: quad-core Cortex™ -A53  1.8GHz main frequency
Memory capacity: 1GB
Fuselage storage: 8GB
Video: H.264 codec
Audio: G.711/G.722/G.729 codec
Network: 10-100Mbps adaptive
Communication protocol: TCP, UDP, RTP, ARP, IGMP, HTTP, SIP
External interfaces: power interface *1, control interface *1, RJ45 *1, RS485 *1
Touch control mode: multi-point capacitive touch screen
Operating voltage: DC12-24V
Standby power consumption: less than 5W
Power consumption: less than 10W
Operating temperature: -10℃~+55℃
Dimensions: 238*388*20mm (L*W*H)
Hanging board size: 189.5*93mm (L*W)
Installation method: wall-mounted