Ward nursing intercom ward door machine HIN-10E
Update：2024/1/15 16:09:35
- Brand Ward nursing intercom system
- Model HIN-10E
Introduction
This device is easy and fast to connect, with simple and easy-to-understand functions, mainly used to display basic patient information in the ward, as well as a simple workstation for nurses, such as answering calls, nursing positioning, etc. It is usually installed on the wall outside the ward door or outside the door.
Function introduction:
Transmit data information based on TCP/IP network protocol.
The ward door machine can perform duplex intercom with the nurse station host or medical assistant, with clear voice and no distortion.
Support synchronous data, real-time update of patient information data in the bed.
Using multi-touch capacitive display, it supports the current ward bed levels of super-class, first-class, second-class, and third-class.
You can view the information introduction of the department and the educational videos and texts released by the hospital.
Supports 24V power box centralized power supply or 24V non-standard POE power supply (recommended) two ways.
Technology, specifications and parameters:
Screen size: 10.1 inches
Resolution: 1280*800
Operating system: Android 10
Main control platform: quad-core Cortex™ -A53 1.8GHz main frequency
Memory capacity: 1GB
Fuselage storage: 8GB
Video: H.264 codec
Audio: G.711/G.722/G.729 codec
Network: 10-100Mbps adaptive
Communication protocols: TCP, UDP, RTP, ARP, IGMP, HTTP, SIP
External interfaces: power interface *1, control interface *1, RJ45 *1, RS485 *1
Touch control mode: multi-point capacitive touch screen
Operating voltage: DC12-24V
Standby power consumption: less than 5W
Power consumption: less than 10W
Operating temperature: -10℃~+55℃
Dimensions: 279*155*19.2mm (L*W*H)
Hanging board size: 189.5*93mm (L*W)
Installation method: wall-mounted
More Products
