Sanling electron has been concerned about the market demand, listen to customer suggestions, in order to meet the more practical applications, Sanling ward TV sound system increases a Bluetooth audio receiving box TS-JW, with Bluetooth function of smart TV.

Bluetooth audio receiver in TS-JW TV audio Bluetooth audio receiver box in TS-JW TV sound system
Embedded installation, according to the national standard 86 box design, usually installed in equipment or on the wall, to receive TV audio signal and connected to the system bus.
Function introduction:
- cooperate with TV sound extension (model: TS-A/TS-A1) can be used, the extension is connected with the connection box through four core bus.
And television can realize audio connection through three ways:
3.5mm dual channel stereo audio input interface;
The channel AV stereo audio input interface.
Through Bluetooth and TV stereo hi fi audio transmission (this function should be matched with Bluetooth audio output smart TV use);
Technical specification parameter:
Working voltage: 8V~14V
Frequency response: 200Hz ~ 18KHz
Maximum power consumption: 0.072W
Output impedance: 600
Operating temperature: -20 degrees C ~ +80
Working humidity: 10% ~ 90%
Connection mode: four core bus
Audio interface: RCA dual channel /3.5mm jack / Bluetooth 4
Size: 86x86x22mm (LxWxH)
Panel size: 86x86x9mm (LxWxH)
Note: with the 12V/1A power supply (TS-P1210)