ICU visiting intercom three-color door lamp HIN-DL3
Update：2024/3/14 15:18:19
- Brand ICU Ward Visiting System
- Model HIN-DL3
Introduction
This equipment is easy to connect and has simple and easy-to-use functions. It is mainly used for service positioning and is usually installed above the door of the ward.
Function introduction:
It is connected to the ward door machine or bedside extension through a five-pin cable.
Three colors can be used to distinguish between the patient's general call, bathroom alarm, and entering the nursing state.
① During a normal call, the door light outside the ward flashes green;
② When the nurse calls, the door light outside the ward flashes blue;
③ When the bathroom alarm is triggered, the door light outside the ward flashes red;
④ When the call of the sickbed, the call of the nurse station, and the alarm of the bathroom are lifted, the door light outside the ward will be turned off.
Technology, specifications and parameters:
Communication protocol: RS485
External interfaces: power interface *1, RS485 interface *1
Operating voltage: DC18V
Standby power consumption: less than 1W
Power consumption: less than 5W
Operating temperature: -10℃~+55℃
External dimensions: φ105mm
Hanging plate size: φ72.5mm
Installation method: wall-mounted
More Products
